Both C16 and C24 are strength-graded structural timbers, but choosing the higher grade doesn't always mean making a better purchase. If you're buying timber for floor joists, roof rafters, stud walls or general construction, understanding the difference could help you avoid unnecessary expense.
The important thing is choosing timber that meets your project's structural requirements rather than automatically paying more for a higher grade.
What Is the Difference Between C16 and C24 Timber?
C16 and C24 are strength grades used to classify structural softwood. The letter C refers to coniferous timber, which includes species such as spruce and pine. The numbers represent the characteristic bending strength of each grade, measured in newtons per square millimetre (N/mm²).
C16 has a characteristic bending strength of 16 N/mm², while C24 has a characteristic bending strength of 24 N/mm².
This means C24 has 50% higher characteristic bending strength than C16. However, that doesn't mean a C24 joist can automatically carry 50% more weight or span 50% further. Actual performance depends on timber dimensions, spacing, loading conditions and structural design.
Both grades are defined under BS EN 338, the standard covering strength classes for structural timber.
Is C24 Always Better Than C16?
Not necessarily. C24 offers higher strength and stiffness, but that additional performance isn't always required.
If C16 meets the structural specification, there may be no practical benefit in paying more for C24. The right choice depends on the job, not simply which grade has the higher number.
What Is C16 Timber Used For?
C16 is a commonly used grade of structural softwood in the UK. It provides suitable strength for many building applications and is often a more economical option than C24, although prices vary depending on size, supplier and availability.
C16 timber can be used for stud walls, partitions, floor and ceiling joists, roof rafters and general structural framing, provided the design requirements are met.
Despite having a lower strength classification than C24, C16 is still structural timber. It can be used in load-bearing applications where the required calculations or approved span tables permit it.
Can You Use C16 Timber for Floor Joists?
Yes, provided the timber grade, dimensions and spacing meet the structural requirements.
For example, C16 may be sufficient for floor joists across a particular span. If the timber meets the approved specification, there may be no reason to pay more for C24.
However, the correct grade must always be confirmed against the relevant structural design or span tables.
When Should You Choose C24 Timber?
C24 is a higher strength grade of structural softwood, offering greater characteristic bending strength and stiffness than C16.
It is often specified for longer-span floor joists, roof rafters, beams and other load-bearing components where higher structural performance is required.
C24 grading generally allows fewer or less severe strength-reducing characteristics, such as certain knots and defects. However, C24 is a structural grade, not a guarantee of a particular decorative appearance.
Is C24 Better for Longer Spans?
C24 can be useful for longer spans because of its higher strength and stiffness.
However, the grade alone doesn't determine how far a joist or rafter can span. Timber depth, width, spacing, loading and support conditions must also be considered.
For longer spans or higher loads, C24 may help achieve the required structural performance with a particular timber section, but the final choice must follow the structural design.
C16 or C24 for Floor Joists and Roof Rafters?
Both C16 and C24 can be used for floor joists and roof rafters, provided the selected timber meets the structural requirements.
For shorter spans and suitable loading conditions, C16 may be sufficient. Where spans are longer or loads are greater, C24 may be specified because of its higher strength and stiffness.
Choosing C24 does not remove the need to check joist dimensions, spacing or support conditions.
If your building plans specify C24, don't replace it with C16 without confirmation from the structural designer.
How Can You Tell Whether Timber Is C16 or C24?
Structural timber is strength graded to confirm that it meets the requirements of its classification.
When buying C16 or C24 timber, check the product's grading information and appropriate strength-grading marks or accompanying documentation.
These help identify the grade and confirm that the timber has been assessed for structural use.
Can You Identify C16 or C24 by Looking at the Timber?
Not reliably.
Although strength grading takes characteristics such as knots and other defects into account, appearance alone doesn't confirm a timber grade.
A board with fewer visible knots isn't necessarily C24, and the timber's colour doesn't indicate its structural strength.
Always check the grading information rather than relying on appearance.
Does C24 Timber Last Longer Than C16?
Not necessarily.
C16 and C24 describe structural strength, not resistance to moisture or decay. A higher strength grade does not automatically mean timber will last longer outdoors.
For decking frames, pergolas, garden buildings and other external structures, you must also consider the timber's natural durability or preservative treatment and its intended exposure conditions.
Is Treated C16 Timber Suitable for Outdoor Use?
It can be, provided the timber has the appropriate preservative treatment for its intended use and meets the structural requirements.
For example, treated C16 timber may be suitable for an outdoor structure, while untreated C24 timber should not automatically be considered suitable for the same conditions simply because it is stronger.
If you're planning an outdoor project, check both the structural grade and the relevant timber use class
Is C24 Worth the Extra Money?
That depends on what you're building.
If C16 meets the required structural specification, paying more for C24 may offer no practical advantage.
However, if your project requires C24, choosing C16 simply because it costs less could mean the timber no longer meets the necessary structural requirements.
The best approach is to check the specification before ordering. That way, you're paying for the performance your project needs rather than assuming the higher grade is always the better choice.
Buy C16 and C24 Structural Timber at Snowdon Timber
Whether you're building stud walls, installing floor joists, working on a roof structure or planning a larger construction project, choosing the correct timber grade matters.
At Snowdon Timber, we supply structural timber for a wide range of construction, renovation and DIY projects.
Our team can help you explore the available C16 and C24 timber options and product specifications. For load-bearing applications, always follow the approved structural design or relevant professional guidance.
BUILD IT. LOVE IT.